Clarion Platinum Sound Processor Guía de usuario descargar pdf (Pagina 2)

TOOLS for SCHOOLS by Advanced Bionics PLATINUM SOUND PROCESSOR Product Guide

Headpiece

Cable Connector

Sensitivity

Control

Volume

Control

Program

Selector

Processor

Electronics

Headpiece

Microphone

Rechargeable

Battery

Auxiliary

Input Jack

Built-in LED

Status Light

Headpiece

Cable

Quick-Start Guide and System Checks:

Step 1: Verify that the Program Selector/Switch is in the off position (O).

Step 2: Slide a fully charged Battery or AA Battery Pack into position on the Processor.

Check to ensure that the Battery is secure.

Step 3: Make sure that the Cable is plugged into both the Processor and the Headpiece.

Check that the Cable is not twisted or frayed. The connections should be stable,

not loose.

Step 4: Adjust the Volume Control so that the indicator notch is all the way to the left.

Step 5: Verify that the Sensitivity control notch is in the 12 o’clock position.

Step 6: Place the Headpiece over the internal implant (there is magnetic attraction

between the Headpiece and internal stimulator).

Step 7: Turn on the Processor by switching the Program Selector from off to the desired

program location (•, ••, •••). The LED (light emitting diode) will ﬂash RED to

indicate PowerCel charge. A fully charged battery will ﬂash three to four times.

Step 8: Verify that the LED stops ﬂashing once successful communication or “lock” is

established between the Processor and internal implant.

Step 9: Slowly turn up the volume to the recommended position (based on the audiologist

or parent report). NOTE: The LED will ﬂash green in response to loud sound, such

as a clap or voicing near the Microphone.

Step 10: Perform a behavioral listening check, using the Ling Six sounds or another

listening activity.

1 2 3 4 5 6 7 ... 13 14

Sin comentarios

Clarion Platinum Sound Processor Guía de usuario Pagina 2