20
➤ Arming/disarming confirmation siren chirps on or off.
➤ The ignition controlled door lock feature on or off: With this
feature on, the doors will lock three seconds after the ignition
is turned on, and unlock when the ignition is turned off. The
system will not lock the doors when the ignition is turned on
with any door open. If your installer is programming the
security system with the Pro Security Programmer, ignition
lock and unlock are independent features and can be
programmed separately.
➤ Passive door locking (with passive arming) or active door
locking (only when arming with the remote). Passive locking
allows the vehicle's doors to lock when the security system
passively arms (after the 30 second countdown). This feature
only works if passive arming has been programmed.
➤ Panic mode enabled/disabled with the ignition on: Some
states have laws against siren capability in a moving vehicle.
➤ Forced passive arming on or off: If your system is
programmed for passive arming and the forced passive
arming feature has been programmed on, the system will
passively arm after one hour, even if a protected entry has
been left open. This feature is useful if a door has been left
ajar when leaving the vehicle. Forced passive arming ensures
that the security system will be armed in every situation.
nnoottee::
When programmed for passive arming and active
lock, if the system is disarmed without a door being opened,
the system will relock the doors when it passively rearms.
Comentarios a estos manuales