Clarion Platinum Sound Processor Guía de usuario descargar pdf (Pagina 21)

Advanced Bionics Platinum BTE / CII BTE

List of required parts

MLxi or MicroMLxS

MicroLink CI S

Auxiliary audio earhook with cable, available in two

earhook sizes

Platinum BTE / CII BTE speech processor

Blue-red long cable

Pre-Fitting

Set audio mixing ratio to 50/50. 

Fitting with the user

1. Turn all equipment Off.

2. Attach the auxiliary audio earhook to the speech pro cessor.

3. Connect the blue-red long cable to the auxiliary audio

earhook cable and to the MicroLink CI S.

4. Plug the FM receiver into the MicroLink CI S. If

MicroMLxS is used, move the switch to the double green

dot position.

5. Turn the volume of the MicroLink CI S to the minimum.

6. To avoid transient sounds, turn On the FM transmitter,

then MicroLink CI S, then speech processor in that order.

8. Gradually increase the gain of the MicroLink CI S to a

comfortable level.

9. Determine speech recognition ability in quiet with the

FM signal. Ensure that results are similar to implant

alone condition. MicroLink CI S gain may need further

adjustments.

10. Evaluate FM benefit as well as the appropriateness of FM

settings through speech-recognition assessment in the

clinic and standardized questionnaires completed by the

recipient, family members and teachers.

Listening check

The best way to listen to the FM signal is to plug the 

MicroLink CI S with the blue patch cable into a

loudspeaker. Make sure there is a good battery inside the

MicroLink CI S. Then turn On the MicroLink CI S and FM

transmitter. By speaking into the transmitter’s microphone

you should hear your voice through the speaker.

2 5 4

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Sin comentarios

Clarion Platinum Sound Processor Guía de usuario Pagina 21