Clarion S400 Manual de usuario descargar pdf (Pagina 9)

using your system

The buttons used in the instructions in this manual correspond to the

standard configuration. Remember, this is not the only way your

remote may be set up. It can be custom configured to meet your needs.

active arming

You can activate, or arm, the system by pressing on your remote

for one second. When the system arms, you will hear a short siren

sound, or chirp, and the parking lights will flash once. If the vehicle’s

power door locks have been connected to the system, the doors will

lock.

While the system is armed, the status LED will flash approximately once

per second, indicating that the system is actively protecting your vehi-

cle. If you hear a second chirp after arming, and see the status LED

flashing in groups, refer to the Diagnostics section of this guide. This

extra chirp is notifying you of an open zone.

passive arming

The system also can be programmed to arm itself automatically (called

passive arming). If the system is programmed for passive arming, it will

automatically arm 30 seconds after the ignition is turned off and the

system "sees" you leave the vehicle by opening and closing a door.

Whenever the system is in its 30-second passive-arming countdown,

the status LED will flash twice as fast as it does when the system is

armed. The siren will chirp once 20 seconds after the last door has been

closed. The system is not actually armed at that point. The system arms

and the doors lock (if connected and programmed for passive locking)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Sin comentarios

Clarion S400 Manual de usuario Pagina 9